|
|
| |
Base |
Cover |
| Material |
High Density Polyethylene |
High Density Polyethylene or Polyproplene Co-Polymer |
| Fabrication |
Extrusion blow moulded |
Injection Moulded |
| Colour |
Blue |
- |
| Capacity/Brimful |
84 Litre |
- |
| Drum Weight (kg) |
3.0 + 0.3 |
- |
| Minimum Wall Thickness |
1.8 mm |
- |
Stacking Height to 30'C
with relative density of |
|
- |
| Tare Weight (g) |
- |
820 +/- 20 |
| Material |
- |
Gasket |
Metal Gripper |
Stopper |
Sponge Rubber (Approx. 50g) |
Mild Steel Chroming (Appox. 680g) |
HDPE and/or LDPE |
| |
125 Litre Open - Top Drum
|
|
| |
Base |
Cover |
| Material |
High Density Polyethylene |
Polypropylene Co-Polymer |
| Fabrication |
Extrusion blow moulded |
Injection Moulded |
| Colour |
Blue |
- |
| Capacity/Brimful |
128 Litre |
- |
| Drum Weight (kg) |
4.3 + 0.5 |
- |
| Minimum Wall Thickness |
2.6 mm |
- |
Stacking Height to 30'C
with relative density of |
|
- |
| Tare Weight (g) |
- |
820 +/- 20 |
| Material |
- |
Gasket |
Metal Gripper |
Stopper |
NBR Rubber Cord (Approx. 50g) |
Zinc Galvanised (Appox. 680g) |
Polyethylene |
| |
160 Litre Open - Top Drum
|
|
| |
Base |
Cover |
| Material |
High Density Polyethylene |
High Density Polyethylene or Polypropylene Co-Polymer |
| Fabrication |
Extrusion blow moulded |
Injection Moulded |
| Colour |
Blue |
- |
| Capacity/Brimful |
164 Litre |
- |
| Drum Weight (kg) |
5.5 + 0.5 |
- |
| Minimum Wall Thickness |
2.5 mm |
- |
Stacking Height to 30'C
with relative density of |
|
- |
| Tare Weight (g) |
- |
820 +/- 20 |
| Material |
- |
Gasket |
Metal Gripper |
Stopper |
Sponge Rubber (Approx. 50g) |
Mild Steel Chroming (Approx 660g) |
HDPE and/or LDPE |
| |
200 Litre Open - Top Drum
|
|
| |
Base |
Cover |
| Material |
Highly Density Polyethylene |
High Density Polyethylene or Polypropylene Co-Polymer |
| Fabrication |
Extrsion blow moulded |
Injection Moulded |
| Colour |
Blue |
- |
| Capacity/Brimful |
214 Litre |
- |
| Drum Weight (kg) |
8.25 +/- 0.5 |
- |
| Minimum Wall Thickness |
2.5 mm |
- |
Stacking Height to 30'C
with ralative density of |
|
- |
| Tare Weight (g) |
- |
1.25 +/- 0.05kg |
| Material |
- |
Gasket |
Metal Gripper |
Stopper |
Sponge Rubber (Approx. 70g +/- 10g) |
Mild Steel Chroming (Approx 900g +/- 10g) |
HDPE and/or LDPE) |
| |
|
1) Pallets must be close boarded and double side for stacking
2) If pallets are not used inside the container, the top layer drum must be placed on a piece of plywood
3) Ultimate performance of drum to be confirmed by drum filter
|
